HEB Series-Polyurethane Guide Wheel

Guide wheels with Eamflex polyurethane tread

Tread Encapsulation Hardness

93° Shore A
Protect the ground/walking noise

ok
Rolling resistance

Very good
Wear resistance capacity

Outstanding

Introduction

图片1 拷贝.png

Tread: High-quality polyurethane elastomer cast by chemical reaction with a hardness of 93Shore A, excellent load-bearing capacity, low walking noise, low rolling resistance, ground protection, very wear-resistant, no marks, no staining, and excellent bonding effect with the wheel core.

Wheel core: Metal materials such as 45# steel, aluminum alloy, stainless steel, etc. can be selected according to working conditions; surface treatment can be selected from spray painting, phosphating, galvanizing, Dacromet, etc.

Other characteristics: Corrosion resistance to various corrosive substances; Working temperature: -30°C to +70°C, short-term up to +90°C, load capacity is reduced above +40°C, antistatic agent can be added.

Specification

Guide Wheel	Wheel Diameter （D）mm	Wheel Width （T1）mm	Load Capacity （kg)	Bearing Model	Shaft Hole Diameter （d）mm	Clamping Length （T2）mm
HEB 60/20	60	20	90	Customization Acceptable
HEB 60/25	60	25	120	Customization Acceptable
HEB 70/20	70	20	110	Customization Acceptable
HEB 70/25	70	25	140	Customization Acceptable
HEB 70/30	70	30	160	Customization Acceptable
HEB 75/25	75	25	150	Customization Acceptable
HEB 75/30	75	30	180	Customization Acceptable
HEB 80/25	80	25	160	Customization Acceptable
HEB 80/30	80	30	190	Customization Acceptable
HEB 80/40	80	40	250	Customization Acceptable
HEB 90/25	90	25	180	Customization Acceptable
HEB 90/30	90	30	210	Customization Acceptable
HEB 90/40	90	40	280	Customization Acceptable
HEB 100/30	100	30	240	Customization Acceptable
HEB 125/30	125	30	375	Customization Acceptable
For other sizes, please contact us for inquiry