EN
Quick Links
75 Shore A
Very good
Very good
Very good
Tread: "The high-quality polyurethane elastomer cast through chemical reaction has A hardness of 78±3 Shore A. It has low walking noise, high dynamic load-bearing capacity, protects the ground, is very wear-resistant and resistant to cutting
It has high tear strength, leaves no marks, has good resilience and an excellent combination effect with the wheel body.
Wheel core: Materials such as die-cast aluminum alloy and nylon can be selected according to the working conditions. The surface treatment can be selected as painting.
Other features:The temperature resistance of the rubber coating is from -25℃ to +70℃, with a short-term high temperature of +90℃. Tread undercut treatment effectively increases friction.
Maintenance-free under normal usage conditions
| Single Wheel | Wheel Diameter (D) mm |
Wheel Width (T1) mm |
Load (Q) kg |
Bore Shaft Diameter | Bearing Selection | Bearing Type | Wheelbase Length | |||||||||||
| QSF01-6204 | 200 | 50 | 300 | 47 | Ball Bearing | 6204 | 50 | |||||||||||
| QSF01-6205 | 200 | 50 | 300 | 47 | Ball Bearing | 6205 | 60 | |||||||||||
| Other sizes are available upon request | ||||||||||||||||||
The advantage of polyurethane lies in the fact that by adjusting the polyurethane formula, one can change its hardness, color, friction coefficient, etc., to achieve the effects of noise reduction, anti-static, and ground protection. Its long lifespan and low maintenance costs make it have a high overall cost-effectiveness. Various environments can be used, such as food-grade (without pollution), conductive-grade (for electronic workshops), and high-load (for port equipment).
We can customize the corresponding polyurethane wheels according to your requirements. Under normal circumstances, the maximum load can reach 10T and the maximum speed can reach 10 kilometers per hour.
Yes, we can adjust the polyurethane formula to meet different requirements.
The hardness range of polyurethane materials usually falls between Shore 70A and Shore 100D. High-hardness polyurethane materials have better load-bearing capacity and wear resistance, while low-hardness polyurethane materials offer better ground protection and noise reduction effects.
All the parameters can be customized according to your needs.
We support e.g., aluminum, steel, nylon cores
The minimum order quantity is 10 pieces. The delivery time is usually 25 days.
We support the proofing process, but we require you to pay the corresponding fees.
If delamination or cracking occurs within 24 months, we will provide a free replacement.
VSA Series-Polyurethane Idler Wheel
GSFB Series-Flanged Polyurethane Drive Wheel
VSC Series-Polyurethane Heavy Duty Idler Wheel
HEC Series-Polyurethane Guide Wheel
