EN
Quick Links
75 Shore A
Very good
Very good
Very good
Tread: The high-quality polyurethane elastomer cast by chemical reaction has a hardness of 75±3 Shore A, very good floor protection, low noise operation, low rolling resistance, high resistance to cutting and tearing, no marking, no staining, and excellent bonding effect with the wheel core.
Wheel core: Metal materials such as 45# steel, cast iron, die-cast aluminum alloy, stainless steel, etc. can be selected according to working conditions; surface treatment can be spray painting, phosphating, galvanizing, Dacromet, etc.
Other characteristics: Resistant to a wide range of corrosive substances; operating temperature: -30°C to +70°C, temporarily up to +90°C, load capacity reduced above +40°C
| Single Wheel | Single Wheel Diameter (D) mm |
Single Wheel Width (T2) mm |
Load Capacity at 4KM (kg) |
Load Capacity at 10KM (kg) |
Number Of Mounting Holes | Mounting Hole Diameter | Center Hole Diameter (d) [mm] |
PCD (mm) |
||||||||||
| GSFB 100/40 | 100 | 40 | 300 | / | Customization Acceptable | |||||||||||||
| GSFB 125/40 | 125 | 40 | 350 | / | Customization Acceptable | |||||||||||||
| GSFB 150/50 | 150 | 50 | 450 | 180 | Customization Acceptable | |||||||||||||
| GSFB 180/50 | 180 | 50 | 650 | 240 | Customization Acceptable | |||||||||||||
| GSFB 200/50 | 200 | 50 | 700 | 300 | Customization Acceptable | |||||||||||||
| GSFB 250/50 | 250 | 50 | 850 | 320 | Customization Acceptable | |||||||||||||
| GSFB 300/60 | 300 | 60 | 1100 | 450 | Customization Acceptable | |||||||||||||
| For other sizes, please contact us for inquiry | ||||||||||||||||||
The advantage of polyurethane lies in the fact that by adjusting the polyurethane formula, one can change its hardness, color, friction coefficient, etc., to achieve the effects of noise reduction, anti-static, and ground protection. Its long lifespan and low maintenance costs make it have a high overall cost-effectiveness. Various environments can be used, such as food-grade (without pollution), conductive-grade (for electronic workshops), and high-load (for port equipment).
We can customize the corresponding polyurethane wheels according to your requirements. Under normal circumstances, the maximum load can reach 10T and the maximum speed can reach 10 kilometers per hour.
Yes, we can adjust the polyurethane formula to meet different requirements.
The hardness range of polyurethane materials usually falls between Shore 70A and Shore 100D. High-hardness polyurethane materials have better load-bearing capacity and wear resistance, while low-hardness polyurethane materials offer better ground protection and noise reduction effects.
All the parameters can be customized according to your needs.
We support e.g., aluminum, steel, nylon cores
The minimum order quantity is 10 pieces. The delivery time is usually 25 days.
We support the proofing process, but we require you to pay the corresponding fees.
If delamination or cracking occurs within 24 months, we will provide a free replacement.
VSA Series-Polyurethane Idler Wheel
GSFB Series-Flanged Polyurethane Drive Wheel
VSC Series-Polyurethane Heavy Duty Idler Wheel
HEC Series-Polyurethane Guide Wheel
