GEFA Series-Polyurethane flange structure driving wheel

Drive Wheels with Eamflex Polyurethane Tread

Tread Encapsulation Hardness

93° Shore A
Protect the ground/walking noise

ok
Rolling resistance

Very good
Wear resistance capacity

Outstanding

Introduction

Tread:The high-quality polyurethane elastomer cast by chemical reaction has the hardness of XXXShore A, low walking noise, low rolling resistance, ground protection, high wear resistance, high cutting and tearing strength, no trace, no dyeing, and excellent bonding effect with the wheel core.

Wheel core:45 # steel, cast iron, die-casting aluminum alloy, stainless steel and other metal materials can be selected according to the working conditions; the surface treatment can select painting, phosphating, galvanizing, Dacromet, etc.

Other features:Resistant to various corrosive substances; working temperature:-30°CTo+70°C, short time up to+90°C, load capacity in+40°CDecrease above

Technical parameters

Single wheel	Wheel diameter (D) mm	Wheel width (T2) mm	Load capacity at 4km/H (kg)	Load capacity at 10km/H (kg)	Number of mounting holes	Diameter of the mounting hole	Central aperture (d) mm	PCD (d1)mm
FL-QDL-100/40	100	40	400	/	Customization is acceptable
FL-QDL-125/40	125	40	450	/	Customization is acceptable
FL-QDL-150/40	150	40	650	300	Customization is acceptable
FL-QDL-165/40	165	40	750	350	Customization is acceptable
FL-QDL-180/40	180	50	850	420	Customization is acceptable
FL-QDL-200/50	200	50	900	450	Customization is acceptable
FL-QDL-225/50	200	80	1400	700	Customization is acceptable
FL-QDL-250/70	250	80	1800	900	Customization is acceptable
FL-QDL-275/80	250	100	2200	1100	Customization is acceptable
FL-QDL-300/80	300	100	2700	1350	Customization is acceptable
FL-QDL-350/85	350	80	2200	1100	Customization is acceptable
FL-QDL-400/100	400	100	3400	1700	Customization is acceptable
FL-QDL-415/125	415	125	4800	2500	Customization is acceptable
FL-QDL-450/125	450	150	6500	3000	Customization is acceptable
Please inquire about other sizes.