GSFD Series-Flanged Polyurethane Drive Wheel

Drive wheels with Eaxflex polyurethane tread

Tread Encapsulation Hardness

93 Shore A
Protect the ground/walking noise

good
Rolling resistance

Very good
Wear resistance capacity

Outstanding

Introduction

图片1.png

Tread: High-quality polyurethane elastomer cast through chemical reaction, with a hardness of 93±3 Shore A. It features low walking noise, low rolling resistance, ground protection, excellent wear resistance, high cut and tear resistance, and is non-marking, non-staining, and has excellent adhesion to the wheel hub.

Wheel Hub: Available in 45# steel, cast iron, die-cast aluminum alloy, stainless steel, and other metal materials depending on the working conditions; surface treatments include painting, phosphating, galvanizing, and Dacromet coating.

Other Characteristics: Resistant to various corrosive substances; operating temperature: -30°C to +70°C, short-term up to +90°C; load capacity decreases above +40°C.

Technical parameters

Single Wheel	Wheel Diameter (D) mm	Wheel Width (T2) mm	Load Capacity at 4km/h (kg)	Load Capacity at 10km/h (kg)	Number of Mounting Holes	Hole Shaft Diameter	Hub Length
GSFD 250*50	250	50	1250	620	Customization Acceptable
GSFD 250*60	250	60	1500	750	Customization Acceptable
GSFD 300*45	300	45	1300	650	Customization Acceptable
GSFD 300*80	300	80	2400	1200	Customization Acceptable
GSFD 300*100	300	100	3000	1500	Customization Acceptable
GSFD 360*75	360	75	2500	1250	Customization Acceptable
GSFD 360*100	360	100	3600	1800	Customization Acceptable
GSFD 400*80	400	80	3000	1500	Customization Acceptable
GSFD 400*125	400	125	5000	2500	Customization Acceptable
GSFD 500*100	500	100	5000	2500	Customization Acceptable
GSFD 600*125	600	125	10000	5000	Customization Acceptable
GSFD 600*200	600	200	12000	6000	Customization Acceptable
GSFD 750*200	750	200	15000	7500	Customization Acceptable
GSFD 1000*300	1000	300	30000	15000	Customization Acceptable
Other sizes are available upon request