GSF03 Series-Aluminum Core PU Floor Scruuber Wheels

Floor scrubber wheels with Saxflex polyurethane tread

Tread Encapsulation Hardness

75 Shore A
Protect the ground/walking noise

Very good
Rolling resistance

Very good
Wear resistance capacity

Very good

Introduction

图片1.png

Tread: The high-quality polyurethane elastomer cast through chemical reaction has A hardness of 78±3 Shore A. It has low walking noise, high dynamic load-bearing capacity, protects the ground, is very wear-resistant and resistant to cutting

It has high tear strength, leaves no marks, has good resilience, and has an excellent combination effect with the wheel body

Wheel core: Materials such as die-cast aluminum alloy and nylon can be selected according to the working conditions. The surface treatment can be selected as painting.

Other features: The temperature resistance of the rubber coating is from -25℃ to +70℃, with a short-term high temperature of +90℃. Tread undercut treatment effectively increases friction.

Maintenance-free under normal usage conditions

Technical parameters

Single Wheel	Wheel Diameter (D) mm	Wheel Width (T2) mm	Load (Q) kg	Bore Shaft Diameter	Hub Groove Width	Hub Groove Height	Wheelbase Length (T1) mm
GSF03-254/19/6	254	80	450	19	6	21.8	55
GSF03-254/20/6	254	80	450	20	6	22.8	55
GSF03-300/25/6	300	80	550	25	6	27.8	55
GSF03-254/19/5	254	80	450	19	5	21.8	55
GSF03-254/20/5	254	80	450	20	5	22.8	55
GSF03-300/25/5	300	80	550	25	5	27.8	55
Other sizes are available upon request