VED Series-Polyurethane Heavy Duty Idler Wheel

Idler wheel with Eamflex polyurethane tread

Tread Encapsulation Hardness

93 Shore A
Protect the ground/walking noise

good
Rolling resistance

Very good
Wear resistance capacity

Outstanding

Introduction

图片1.png

Tread: High-quality polyurethane elastomer cast through chemical reaction, with a hardness of 93±3 Shore A. It features low walking noise, low rolling resistance, ground protection, excellent wear resistance, high cut and tear resistance, and is non-marking, non-staining, and has excellent adhesion to the wheel hub.

Wheel Hub: Available in 45# steel, cast iron, die-cast aluminum alloy, stainless steel, and other metal materials depending on the working conditions; surface treatments include painting, phosphating, galvanizing, and Dacromet coating.

Other Characteristics: Resistant to various corrosive substances; operating temperature: -30°C to +70°C, short-term up to +90°C; load capacity decreases above +40°C.

Technical parameters

Single Wheel	Wheel Diameter (D) mm	Wheel Width (T2) mm	Load Capacity at 4km/h (kg)	Load Capacity at 10km/h (kg)	Bearing Type	Shaft Hole Diameter (mm)	Hub Length (mm)
VED 25050	250	50	1250	620	Customization Acceptable
VED 25060	250	60	1500	750	Customization Acceptable
VED 30045	300	45	1300	650	Customization Acceptable
VED 30080	300	80	2400	1200	Customization Acceptable
VED 300100	300	100	3000	1500	Customization Acceptable
VED 36075	360	75	2500	1250	Customization Acceptable
VED 360100	360	100	3600	1800	Customization Acceptable
VED 40080	400	80	3000	1500	Customization Acceptable
VED 400125	400	125	5000	2500	Customization Acceptable
VED 500100	500	100	5000	2500	Customization Acceptable
VED 600125	600	125	10000	5000	Customization Acceptable
VED 600200	600	200	12000	6000	Customization Acceptable
VED 750200	750	200	15000	7500	Customization Acceptable
VED 1000300	1000	300	30000	15000	Customization Acceptable
For other sizes, please inquire